4x7 DIY Uncaged Press Plates Kit - Build A 12-30 Ton Rosin Press - Bottom Plate Holder Included

Dabpress
dp-rp47
In stock
Uncaged Press Plates
$429.00 $319.00
Warehouse *
$319.00
4x7 Rosin Plates - 1,200 Watts - Build Your Own 20-30 Ton Hydraulic Rosin Press

Please take a look at our gears from Google Drive for product size comparison- Learn More


Features:

  • Alignment & Safety - Upgraded version 4x7" uncaged kit allows the bottom platen to secure on the hydraulics for alignment and safety in the process of working.
  • Innovative 8mm Slim Insulator - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
  • 4x7" Heat Press Platens - Well suited to squeeze large amount at a time for industrial use; Pairs it well with a 20-ton hydraulic shop press
  • Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
  • 4pc Heating Rods - Quick and even heating up with 1,200w PID temp controller box. 
  • Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.

Specifications:

  • Temperature Range: 0-399F 
  • Voltage: 110/220V
  • Power: 1,200W
  • Each Heater: 300W
  • Plate Size: 4" x 7" 
  • Gross Weight: 13.86Lbs

# Please do not make the pucks with the DIY rosin press to avoid scratching the working surface.

Filters in Pairing:

  • 2x4/2x4.5" filter > Pairs 3x5" size platen > Fits up to 4-ton pressure
  • 2.5x4.5" filter > Pairs 3x5"/3x7"/4x7" size platen > Fits up to 10-ton pressure
  • 3x7" > Pairs up to 3x7"/4x7" size platen > Fits up to 10-ton pressure
  • How to pick up a pre-press mold to pair the filter learn more from PrePress Collection
Hydraulic Press for Pairing:

  • 4x7" uncage kit works great with most of the hydraulic presses.
  • Recommend to pair it with a 10-20 ton hydraulic press based on the number of squeezed materials.
Tips:

  • Double squashes by cutting 2x4.5" rosin bags into half for flower if pairing it with cylinder prepress mold ( bottle tech styled prepress mold )
  • With 2x4" rectangular mold - Create a slim puck to pair it with 2x4.5" rosin bags ( 2x4.5" bag could be cut into 2x4" bag ) 
  • 160, 120 and 90 micron bags were suitable for flower extraction, and 37 micron is for hash.
  • Please don't load the full materials inside bags to protect the bags from blowing out.
  • 110-volt units for the USA, Canada, Mexico; 220-volt units for Europe customers, pick the correct voltage before shopping.
  • How to get a decent yield, learn more from Our Blog
  • Why can't I use Dabpress temp controller box for E-nail? Read Here 

Instructions to Secure Bottom Platen to Hydraulic Press Frame:

  1. Install the top heated plates onto the ram of the hydraulic press.
  2. Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
  3. Lower the ram on the hydraulic press just until both plates touch.
  4. Adjust the position of the plates if necessary, so they are aligned.
  5. Ensure bamboo plank is aligned under the bottom plate.
  6. Tighten the nut on the long threaded rod to secure it to the worktable plate below.

    Customer Reviews

    Based on 13 reviews
    77%
    (10)
    23%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    M.C.
    Works great

    Recommend it

    C
    C.T.
    Nice stuff

    I have only had my plates for a week and they seem to be very nice. But I do Have a 5° fluctuation on one of the plates it keeps going bouncing between the 5° but seems to be working very good I think a piece of insulation underneath that plate will fix everything

    Dear Mr. Thomas, Thanks for your unbiased product review. From the image you attached, it looks you forgot putting ' Bamboo Insulator Included' between the bottom plates and working table of bench press. I consider it will fix the issue caused. Regards, Dabpress Team
    S
    S.S.
    Awesome Product

    Really impressed with your product.Plates are finished really well , and PID Controller is accurate.Cable's are well insulated .Also rapid delivery.
    Good work, i will definitely be back in the future.

    J
    J.v.d.L.
    Great product!!

    these plates work very good and heat up quickly. they come very well packed including a bamboo insulation plate and a tool to hold the bottem plate in place.
    the only thing I didn't like was the additional costs that came with the package for customs. This is an additional 25% to the amount I payed in the webshop. In the end I think it is all woth it for this high quality product!
    A very happy custumer from the Netherlands.

    P
    P.R.
    Dabpress ucaged 4x7

    Made a 20 rosin press w these and it works perfectly if I had a do over I wouldn’t hesitate to buy again . Great A tip on the press it fits a harbor freight 20 ton perfectly and has a clamping attachment to secure it .make sure you bleed your jack before using

    How to Save Your Money?

    1, Please buy our bundled products - Learn more
    2, Please read our news about promotional products - Learn more
    3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

    Be Noted, Please!

    • Bundle order discount and our promotion code cannot be used at the same time.
    • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

    Our Policies

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question
    Have Questions? Reach out Here

    Customer Reviews

    Based on 13 reviews
    77%
    (10)
    23%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    M.C.
    Works great

    Recommend it

    C
    C.T.
    Nice stuff

    I have only had my plates for a week and they seem to be very nice. But I do Have a 5° fluctuation on one of the plates it keeps going bouncing between the 5° but seems to be working very good I think a piece of insulation underneath that plate will fix everything

    Dear Mr. Thomas, Thanks for your unbiased product review. From the image you attached, it looks you forgot putting ' Bamboo Insulator Included' between the bottom plates and working table of bench press. I consider it will fix the issue caused. Regards, Dabpress Team
    S
    S.S.
    Awesome Product

    Really impressed with your product.Plates are finished really well , and PID Controller is accurate.Cable's are well insulated .Also rapid delivery.
    Good work, i will definitely be back in the future.

    J
    J.v.d.L.
    Great product!!

    these plates work very good and heat up quickly. they come very well packed including a bamboo insulation plate and a tool to hold the bottem plate in place.
    the only thing I didn't like was the additional costs that came with the package for customs. This is an additional 25% to the amount I payed in the webshop. In the end I think it is all woth it for this high quality product!
    A very happy custumer from the Netherlands.

    P
    P.R.
    Dabpress ucaged 4x7

    Made a 20 rosin press w these and it works perfectly if I had a do over I wouldn’t hesitate to buy again . Great A tip on the press it fits a harbor freight 20 ton perfectly and has a clamping attachment to secure it .make sure you bleed your jack before using

    You have successfully subscribed!