5.5x7 DIY Large Rosin Plates Caged Kit - Pairs It Well with A 20-30 Ton H-frame Hydraulic Press
5.5x7 DIY Large Rosin Plates Caged Kit - Pairs It Well with A 20-30 Ton H-frame Hydraulic Press
Features:
- [ Heavy-duty Mount ] > Made of 4-piece stainless steel rods and durable 6061 aluminum plates, pairs it well with an h-frame hydraulic press as commercial use.
-
[ 5.5x7" Heat Press Platens ] > Well suited to squeeze large amount at a time for industrial use; Pairs it well with up to 20-ton hydraulic shop press
- [ Food-grade Working Surface ] > Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
- [ 4pc Heating Rods ] > Quick and even heating up by 1,200-watt PID temp controller box.
- [ Long Working Life Guaranteed ] > The heating rods have a service life of more than 6,000 times.
- Temperature Range: 0-399F
- Power: 1,200W | 4 Heating Rods
- Voltage: 110/220 Volts
- Plate Size: 5.5" x 7"
- Rosin Cage Dimensions: 3.5" x 11" x 6.3"
- External Package: 15.3" x 13.8" x 9"
- Gross Weight: 26lbs
- Distance/Clearance Between up and bottom platen: 35mm/1.38"
Hydraulic Press for Pairing:
- 5.5x7" cage works great with the H-frame hydraulic press with the proper clearance.
- 5.5x7" cage well pairs it with 20-30 ton hydraulic press as commercial use.
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to choose filters and prepress molds.
- The yields are not very good, why?
- How to install the DIY press plates kits
- How to choose hydraulic press for pairing
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing a purchase).
Dear Rosineers,
First of all I am very grateful to choose our products, which you can buy directly from our Amazon store from the link below.
If you are statisfied with our product and service, and you are willing to post a YouTube, Reddit tutorials or post your product review on the Amazon product page, please contact us with a screenshot or link for a amazing gift.
Buy the Branded Products from Amazon Store:
- Dabpress Amazon US Store - Shop Now
- Dabpress Amazon Canada Store - Shop Now
- LUKPRESS Amazon US Store - Shop Now
- ROSITEK Amazon US Store - Shop Now
Best regards,
DABPRESS TEAM
support@dabpress.com
QUESTIONS & ANSWERS
Ask a Question-
Is it possible to heat higher than 399 degrees? Most controllers in the setup menu will allow adjustment of temp. Thank you Dave
Hello Dave, Thanks for reaching out. Since the PID controller of default setting is 399F, user can't adjust it by themselves. Sorry about that.