4 Ton Starter Rosin Press - 3x5 Heated Platens - 7-10g Materials Loaded - Upgrade from 3-Ton Press
4 Ton Starter Rosin Press - 3x5 Heated Platens - 14g sift or 10g flower with 4-ton heat press
Features:
- 3x5" Anodized Heated Platens - Well suited to squeeze 7-10g materials; easy to clean and the best flavor for vaping.
- Heat Insulation Performance - Low heat transfer bamboo insulator guarantees quick heating-up and protects the bottle jack from overheating.
- Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durability.
- Above 1,000 PSI Delivered - Pairs well with cylinder pre-press mold and 2x4" rosin filter, achieving and maintaining optimal pressure utilizing a vertical filter build, and a pressed puck size of 2.4 sq/in.
- Replaceable Bottle Jack - Simply remove the bottle jack and replace it with replacement at home to get a long service life.
Specifications:
- Temperature Range: 0-399F
- Power: 500 Watts
- Voltage: 110/220 Volts
- Total Weight: 31.5 lbs
- Package Dimension: 21.2" x 14" x 12.4"
- Frame Dimension: (H) 45cm x (W) 22.5cm x (D) 21.5cm
- PID Temp Controller Box Dimension: (H) 15cm x (W) 11.5cm x (D) 6.8cm
- Working Surface: 3" x 5"
- The tonnage of Original Bottle Jack: 4 Ton
- Height of Original Bottle Jack: 7.3"
- Clearance between Upper and Bottom Platens: 33mm/1.3"
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to choose filters and prepress molds.
- The yields are not very good, why?
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing a purchase).
User Manual & Troubleshooting Includes:
QUESTIONS & ANSWERS
Ask a Question-
Is there lifetime warranty ?
My apologies to answer so late. We didn't offer a lifetime warranty. However, it seems like a lifetime warranty from other sellers who require " Customer is responsible for shipping to and from the factory". If I were you, I prefer the TURE 1-year warranty.
-
When the order is delivered. Do you have to assemble the press? Or does it already come assembled
Thanks for reaching out here. 3-Ton press completed setup except the driptech legs need to be installed by rosineer.
-
what is the name of the type of European plug that comes with the European 220v version of the press. I am not sure if a converter is necessary
Thanks for reaching out. We offer 220v European standard unit and plug, simply plug in and start pressing.
-
Are the presses packaged in plain cardboard like the plate kits?
The press is indeed packed in cardboard, but it was covered with very strong foam.
-
The bottle jack no longer holds the pressure. How to fix it?
You will see a safety valve with the red cap on the bottle jack. Simply remove it off and rotate 90 - 180 degrees clockwise. We don't recommend to do that If the bottle jack well works. It will cause the fluid leaking If overrated 6-Ton pressure.
-
On the bj-3t33. Can you switch the 3x3 plates for a size bigger like for the 3x4 pucks please get back to me. Thanks Rex. rcmoyer1062@gmail.com
Thanks for your question. dp-bj3t33 small rosin press is well suited to squeeze 3.5-7g flower or bubble hash. 3x3" sized plates are helpful rosin flows immediately off the heat to preserve the terpenes. If with 3x4" plates, rosin oil will be overheat become the dark. We got a lot of messages from rosineer only concentrate on less 7g material at a time. so we made such AIO press.