My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?
First of all, we do not recommend changing the internal parameters, which will cause a lot of problems. Once a problem occurs after the modification, please refer to the following instructions to change back to the default.
How to Change back to the Default Setting of TC01V5?
#The following instruction is only applicable to "TC01V5" PID controller, not for "TC20V2". As of May 1st,2021, Only Dabpress 12 ton heat press uses a PID temp controller with Item number "TC20V2".
# First of all, please refer to the parameter to default setting as below:
|AL1 = 0030||AL2 = 0050||Atu = 0000||P = 0030|
|1 = 0240||d = 0060||Ar = 0025||t = 0002|
|oH = 0002||SC = 0000||LCy = 0000|
Instuction in Video (TC01V5):
User Manual from Google Drive:
How to calibrate the temp different between SV and PV
PID Temp Controller to Default - Dabpress