Filter Mold Pack Combo 1# ( Flower Extraction ) - Including Handheld Pre Press and 2x4.5" 160-micron 40pc Bags
Features:
- 30mm-inner Handheld Pre Press Mold Included - The bottle tech styled pre-press mold well works with 3.5-7g material, create the pucks with hands.
- 40pc 2x4.5" 160-micron Filters Included - 2x4.5" 160-micron filter well suited to squeeze flower after pairing it with the 30mm-inner handheld pre-press mold.
- Double Squashes with 2x4.5 FIlter - Double squashes by cutting 2x4.5" bags into the half after pair it with the 30mm handheld prepress mold.
- Flower Extraction - The combo was recommended for flower extraction.
Specifications:
- 1pc 30mm-inner cylinder handheld prepress mold ( for flower )
- 40pc 2x4.5" 160-micron rosin bags ( for flower )
- 30mm-inner diameter (1.18") for the handheld pre-press mold
- Loading amount of the prepress mold: 3.5-7g
- Size of filters: 2x4.5"
- Quantities in the pack: 40 Pieces
- Micron: 160µ
How to Avoid Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to start
- Recommendations on materials loaded.
- Rosin filter bags suggested.
- The yields are not very good, why?
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing purchase)
PID TEMP CONTROLLER SETTING:
Press "SET" button to activate temperature controller
Press ◄ button to increase and decrease the value at hundreds, tens and one's places
Press ▼ or ▲ from 0-9 for your desired temp
Press "SET" button to lock the desired temperature in place
CHECK-UP BEFORE BUYING:
Nice, excellent quality product, superior craftsmanship. Makes 4-5gm pucks prepresses them superbly to fit perfectly into their respective filter bags in my case 2×4.5 (160)
The 160 are great for flower and the press creates a nice 6g puck that fits a treat in the 10 tonne press
Mold works great and the bags are really good.
Actually the bags hold up better than other brand.
I’ve done a number of pressings and still haven’t had a blowout. The bags are quite sturdy.
High quality product feels good to use and does the job well.
User Manual & Troubleshooting Includes:
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Have Questions? Reach out Here
Nice, excellent quality product, superior craftsmanship. Makes 4-5gm pucks prepresses them superbly to fit perfectly into their respective filter bags in my case 2×4.5 (160)
The 160 are great for flower and the press creates a nice 6g puck that fits a treat in the 10 tonne press
Mold works great and the bags are really good.
Actually the bags hold up better than other brand.
I’ve done a number of pressings and still haven’t had a blowout. The bags are quite sturdy.
High quality product feels good to use and does the job well.