3x5 DIY Caged Rosin Press Kit - Build A 10-12 Ton Rosin Heat Press Machine for Personal Use
3x5 DIY Caged Rosin Press Kit - Building Your Own Rosin Heat Press Machine for Personal Use
Features:
- 10mm-thickness Insulatior - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
- M8 Size Threads In Bottom Platen - The cage can be secured on the hydraulic press for safety; No bottom plate holder included.
- 3x5" Heated Platens - 3x5" size platen suited to squeeze 3.5-28g materials at a time.
- Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
- Accurate Temp Detected - Separated thermocouples and heating rods detect and deliver an accurate temperature.
- Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.
Specifications:
- Temperature Range: 0-399F
- Power: 500W
- Voltage: 110/220V
- Platen Size: 3" x 5"
- Cube Dimensions: 3.5" x 8.6" x 5.5"
- External Package: 14.2" x 13.2" x 9.4"
- Total Weight: 14.5lbs
- Clearance between Upper and Bottom Platens: 33mm/1.3"
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to choose filters and prepress molds.
- The yields are not very good, why?
- How to install the DIY press plates kits
- How to choose hydraulic press for pairing
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing a purchase).
I was very surprised and happy that this kit feels heavy duty. It worked above and beyond expectations. Thank you
Really well made product that has let me take my rosin pressing to the next level. If space isn’t an issue for you, grab one of these and a 12 ton shop press and your good to go.
After weeks of shopping around and searching I decided to go with dabpress plates and couldn’t be happier. The ten ton press I built with the 3x5 caged unit works amazing couldn’t ask for anything more !
Exactly what I paid for
I purchased these plates because they were some of the nicest looking and a low price, plate are insulated and coloured, clean very easily, and have bang on temp (controller to plate), can produce great quality product. I would recommend this product to anyone that is curious about concentrates. only down sides, the dab press logo is not mounted level, you can see its off (only visual) and the cap nuts at the top of the cage, almost look like they were previously used and refinished and installed ( there are marks on the nut, almost like a wrench was slipping, but is perfectly chromed over, that’s what leads me to believe it was previously used and refinished, I have also seen a video online where a customer had bought the same cage set as me, but one of these nuts, was cross threaded on, to the point it looked way off, I believe if they stepped up quality control, you’d have a great product that produces amazing results as a reasonable cost, win win win, thanks dabpress
Ps I would like to buy more of your products, such as cooling plate, and kief machine, please restock soon :)
User Manual & Troubleshooting Includes:
QUESTIONS & ANSWERS
Ask a Question-
Can the top plate handle 10 -12 tons pulling down if the bolts were replaced with longer ones that reach the base like in your set up?
We never tried that, but I consider it will be no issue.
-
is this made from 6061 grade aluminium? Dabpress dp-rp35s 3x5
Dabpress' caged press plates kit made of 6061 aluminum and stainless steel.
-
What is the least amount I should be squishing with this set up?
1g material also works great with this unit. As usual, We recommend 3.5g - 28g
Have Questions? Reach out Here
I was very surprised and happy that this kit feels heavy duty. It worked above and beyond expectations. Thank you
Really well made product that has let me take my rosin pressing to the next level. If space isn’t an issue for you, grab one of these and a 12 ton shop press and your good to go.
After weeks of shopping around and searching I decided to go with dabpress plates and couldn’t be happier. The ten ton press I built with the 3x5 caged unit works amazing couldn’t ask for anything more !
Exactly what I paid for
I purchased these plates because they were some of the nicest looking and a low price, plate are insulated and coloured, clean very easily, and have bang on temp (controller to plate), can produce great quality product. I would recommend this product to anyone that is curious about concentrates. only down sides, the dab press logo is not mounted level, you can see its off (only visual) and the cap nuts at the top of the cage, almost look like they were previously used and refinished and installed ( there are marks on the nut, almost like a wrench was slipping, but is perfectly chromed over, that’s what leads me to believe it was previously used and refinished, I have also seen a video online where a customer had bought the same cage set as me, but one of these nuts, was cross threaded on, to the point it looked way off, I believe if they stepped up quality control, you’d have a great product that produces amazing results as a reasonable cost, win win win, thanks dabpress
Ps I would like to buy more of your products, such as cooling plate, and kief machine, please restock soon :)