3x7 DIY Caged Press Plates Kit - Build 12-20 Ton Rosin Press Pairing H-frame Hydraulic Press

Dabpress
dp-rp37-110
Out of stock
Unable to process your orders if the items are not available in your local warehouse.
$375.00 $289.00
3x7 DIY Caged Press Plates Kit -  Build 12-20 Ton Rosin Press After Pairing It with H-frame Hydraulic Presses 

Features:

  • 8 mm Slim Heat Insulation - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
  • M8 Size Threads In Bottom Platen - The cage can be secured on the hydraulic press for safety; No bottom plate holder included.
  • Plug and Play - The caged kit comes assembled, just move onto hydraulic press to begin working.
  • 3x7" Size Heated Platens - Well suited to squeeze 3.5 - 36g materials at a time.
  • Accurate and Even Heating up - Separate thermocouples and heating rods detect and deliver accurate temp.
  • Long Working Life - The heating rods have a service life of more than 6,000 times.
Specifications:

  • Temperature Range: 0-399F
  • Power: 600W 
  • Voltage: 110/220V
  • Plate Size: 3" x 7"
  • Cube Dimensions: 3.5" x 10.3" x 5.5"
  • External Package: 14.2" x 13.2" x 9.4"
  • Total Weight: 16lbs
  • Clearance between Upper and Bottom Platens: 36mm/1.41"

How to Avoid the Filter Bags from Blowing out?

  • Remove excess stems from flowers.
  • Use less material in your filter bag.
  • Preheating your material first to get it melty before you begin to apply pressure.
  • Apply the pressure more slowly.
Manual & Troubleshooting Includes:

  • How to choose filters and prepress molds.
  • The yields are not very good, why?
  • How to install the DIY press plates kits
  • How to choose hydraulic press for pairing
  • How to apply the pressure for optimal yield and quality?
  • How to begin extracting.
  • Important notice.
  • Troubleshooting.
  • Question and answer.
  • Check it out here (Highly recommended to read it before doing a purchase).

    Customer Reviews

    Based on 55 reviews
    96%
    (53)
    4%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    T.D.

    3x7 DIY Caged Press Plates Kit - Build 12-20 Ton Rosin Press Pairing H-frame Hydraulic Press

    I
    I.W.
    Amazing Product

    Amazing customer service to and was on time well worth the purchase

    J
    J.S.

    3x7 DIY Caged Press Plates Kit - Build 12-20 Ton Rosin Press Pairing H-frame Hydraulic Press

    @
    @.
    @TheGoodWeedCompany approves of the 3x7 Caged Dabpress

    We did a lot of research and decided on the 3x7 Dabpress Kit for many reasons.

    A friend has another Dabpress model.
    Reviews were favourable online.
    Anodized Aluminum plates.
    Plug and Play ready to put into a press.
    A range of accessories including prepress and bags.

    We have waited a couple weeks to submit a review. After using the Dabpress for two weeks, we are very happy with our 3x7 Caged Press Kit.
    The kit is well made and well machined.
    It heats up quickly and maintains a steady temperature.
    We have paired it with a $300 on sale, 12 ton hydraulic press with pressure gauge, from Princess Auto in Canada.
    The controls are easy to use and the instruction guide was well written.

    We are very happy with our 3x7 Dabpress Caged Kit and would recommend it.

    @thegoodweedcompany on Instagram

    J
    J.C.
    Nice plate set

    Showed up on time, and everything was in good working order. One of the brass bushings needed the set screw tightened, but that was no problem. So far, so good!

    QUESTIONS & ANSWERS

    Ask a Question
    • do the caged kits come with the thing that holds it to the press

      We only provide the threads under the bottom plate without bottom plate holder.

    • 220v to 110v pre heat times faster? Run cooler at 220v?

      As our practice, it is no more big difference. I recommend buying as the standard voltage of the country you located.

    • I just want the cage kit, no controller or heating rods etc.

      Thanks for your messages right here! To customized purchase, we have to ship out from the factory with DHL priority, you will pay about $40 shipping charge as well.

    • How long does it take to make rosin? I hear extracts take several days?

      It only takes a matter of minutes as the rosin is pressed out with heat and pressure. It is available immediately since NO chemicals are involved. Many extracts need to sit for days to let the alcohol (for example) purge or evaporate. With the dabpress, there are absolutely no chemicals involved so the rosin is pure, clean goodness. No need to worry about alcohol, butane, hexane , etc contaminating the rosin!

    • Bought the 3"x7" plates and the dake 10t press shown in the picture. is 10t going to be enough? only need 1000psi at bags. also dont see 3x7 bags...

      10 ton hydraulic press is enough pressure to pair this rosin press plates kit. 

      1,10 Hydraulis shop press usually delivers 7-8 ton pressure of force. 
      2, If you choose our cylinder pre-press mold to make pucks, It is 1.1 square inch 
      3, Max psi: 15432/1.09=14157 
      4, If pressing two rosin press bags at the same time, it should be 7078 psi 
      5, If pressing 2x4" rosin filter bags, it should be 15432/10=1543 psi 
      Ideal psi is 1000-1200, so 10 ton hydraulic press will pair well to our dp-rp35 and rp-rp37

    Have Questions? Reach out Here

    Customer Reviews

    Based on 55 reviews
    96%
    (53)
    4%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    T.D.

    3x7 DIY Caged Press Plates Kit - Build 12-20 Ton Rosin Press Pairing H-frame Hydraulic Press

    I
    I.W.
    Amazing Product

    Amazing customer service to and was on time well worth the purchase

    J
    J.S.

    3x7 DIY Caged Press Plates Kit - Build 12-20 Ton Rosin Press Pairing H-frame Hydraulic Press

    @
    @.
    @TheGoodWeedCompany approves of the 3x7 Caged Dabpress

    We did a lot of research and decided on the 3x7 Dabpress Kit for many reasons.

    A friend has another Dabpress model.
    Reviews were favourable online.
    Anodized Aluminum plates.
    Plug and Play ready to put into a press.
    A range of accessories including prepress and bags.

    We have waited a couple weeks to submit a review. After using the Dabpress for two weeks, we are very happy with our 3x7 Caged Press Kit.
    The kit is well made and well machined.
    It heats up quickly and maintains a steady temperature.
    We have paired it with a $300 on sale, 12 ton hydraulic press with pressure gauge, from Princess Auto in Canada.
    The controls are easy to use and the instruction guide was well written.

    We are very happy with our 3x7 Dabpress Caged Kit and would recommend it.

    @thegoodweedcompany on Instagram

    J
    J.C.
    Nice plate set

    Showed up on time, and everything was in good working order. One of the brass bushings needed the set screw tightened, but that was no problem. So far, so good!

    You have successfully subscribed!