3x5 DIY Uncaged Press Plates Kit - Build A 10-12 Ton Rosin Press - Bottom Plate Holder Included

In stock
Uncaged Press Plates
$399.00 $229.00
Warehouse *
Rosin Press DIY with 3x5 Heated Platens - Build Your Own 10-12 Ton Setup Bottom Plate Holder Included


  • Alignment & Safety - Upgraded version 3x5" uncaged kit allows the bottom platen to secure on the hydraulics for alignment and safety in the process of working.
  • Innovative 8mm Slim Insulator - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
  • 3x5 Heated Platens - 3x5" size platen suited to squeeze 3.5-28g materials at a time.
  • Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
  • Accurate Temperature Detected - Accurate temperature delivered through independent heating rods and thermocouples.
  • Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.


  • Temperature Range: 0-399F 
  • Voltage: 110/220V 
  • Power: 500W
  • Plate Size: 3" x 5" 
  • External Package: 14.0" x 14.0" x 6.1"
  • Gross Weight: 9.5lbs
    Instructions to Secure Bottom Platen to Hydraulic Press Frame:

    1. Install the top heated plates onto the ram of the hydraulic press.
    2. Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
    3. Lower the ram on the hydraulic press just until both plates touch.
    4. Adjust the position of the plates if necessary, so they are aligned.
    5. Insure bamboo plank is aligned under the bottom plate.
    6. Tighten the nut on the long threaded rod to secure it to the worktable plate below.

    How to Avoid the Filter Bags from Blowing out?

    • Remove excess stems from flowers.
    • Use less material in your filter bag.
    • Preheating your material first to get it melty before you begin to apply pressure.
    • Apply the pressure more slowly.
    Manual & Troubleshooting Includes:

    • How to choose filters and prepress molds.
    • The yields are not very good, why?
    • How to install the DIY press plates kits
    • How to choose hydraulic press for pairing
    • How to apply the pressure for optimal yield and quality?
    • How to begin extracting.
    • Important notice.
    • Troubleshooting.
    • Question and answer.
    • Check it out here (Highly recommended to read it before doing a purchase).

      Customer Reviews

      Based on 19 reviews
      Great product

      This is a great set of plates and the bottom plate holder upgrade was a good idea. I added it to a 12 ton h press and it works great!

      Works great

      Easy setup and use. Works great 👍. Fast shipping and great customer service.

      3x5 uncaged Dabpress

      Ordered directly from the factory, shipping took about a week! Was a bit of a wait but oh well.
      3x5 uncaged press works amazing tho. Already showing 20% yields of great rosin ! Super easy too use, easy to set up ! A+ product ! Also DabPress has great customer service, when I had questions concerning shipping thy answered. Vary pleased

      The Press

      Does exactly what I need it do!

      Very good product

      The plates are well made and do their job well, we had some difficulties in setting the temperature, in fact we thought the controller was not working well, but then we succeed, recommended purchase

      User Manual & Troubleshooting Includes:

      - Recommendations on Materials Loaded
      - How to Begin Extracting
      - How to Start
      - Installation
      - Important Notices
      - Questions & Answers
      - Troubleshooting

      User Manual List:

      1, Cylinder Pre Press Mold 
      2, 2X4" Pre Press Mold 
      3, DIY Uncaged Press Plates Kit 
      4, Bottle Jack Styled Rosin Press 
      5, DIY Caged Press Plates Kit 
      6, Hydraulic Cylinder Styled Rosin Press 
      7, Rosin Bags & Combo 
      8, Hydraulic Hand Pump with Gauge 


      Ask a Question
      • Will this mount to a arbor press? . Also would the caged rosin plates work with a arbor press?

        Thanks for your question!  1, Whether the arbor press offer enough space to put dp-rp35 or not. 2, How much pressure will the arbor press deliver? I suggest there are less 3 ton force of pressure to be paired with rosin cage kit. 3, 1,000 psi is ideal pressure in pratice. Try to find A/H frame hydraulic shop press if you could.

      Have Questions? Reach out Here
      You have successfully subscribed!