Sale

ROSITEK 2-in-1 Rosin Press for Making Brick Hash - PPM4 ( Pollen Brick Maker ) - 4 Ton Bottle Jack Included

ROSITEK
dp-ppm4-us
In stock
$569.00 $449.00
Warehouse *
$449.00

ROSITEK 2-in-1 4-Ton Hydraulic Heat Press Machine for Pollen Brick and Extraction - Including Dual 3x5 Inch Heated Plates and Large Heatable Press Mold

Features:
 
[ As a Heat Press Used to Extract ] > It contains a 4-ton welded bottle jack and dual 3x5" heated platen, so this small heat press machine is capable of smashing up to 14 grams of flower or fine materials at a time. Basically, 2x4", 2x4.5" nylon micron pressing bags and 2x4 pre-press mold or cylindrical prepress mold is a recommendation.
[ As a Heat Press for Pollen Brick ] > It comes with a set of 3-piece design pollen press mold. After loading the fine material, you need to prepress it with a clamp vise, and then put the mold between the heated plates, simply push it until the four corners are aligned. To utilize good heat transfer of aluminum to melt the material, at the same time, please apply pressure slowly, only 30-60 seconds long, you will get a perfect brick.
[ Caution During the Extraction ] > (1) Please do not use press molds smaller than 3x5" to make bricks to protect them from scratching/damaging the surface. so we only recommend pairing the included press mold with the heat press machine. (2) It is not recommended to modify the default setting of the PID controller to cause inaccurate temp delivered. (3) Please do not replace jacks exceeding 4 tons to cause damage to the machine.
[ About 3-Piece Pollen Brick Maker ] > It is made of 6061 aluminum, 3 pieces in total, the thickness of the finished brick is not limited. [Internal dimension of maker: 2.47"(width) x 4.36" (Length) x 1.75" (Depth)]. We recommend putting the parchment paper between the material and ram/tray in order to take off the pollen brick easily.
[ About the 4-Ton Heat Press Machine ] > No extra equipment required. This is a complete, portable, personal heat press machine that contains a customized bottle jack and an upgraded PID temperature controller box. The accurate temp detection and delivery and well-holding pressure were the most important things in mind. Without a doubt, replaceable parts and the pluggable controller is great feature to improve the buying experience. 

Specifications:

  • Temperature Range: 0-399F
  • Power: 300 Watts
  • Voltage: 110v/220v 
  • Total Weight: 000 lbs
  • Package Dimension: 0" x 0" x 0"
  • Frame Dimension: (H) 0x (W) 0x (D) 0
  • Working Surface: 3" x 3"
  • Clearance between Upper and Bottom Platens: 

How to Avoid the Filter Bags from Blowing out?

  • Remove excess stems from flowers. 
  • Use less material in your filter bag.
  • Preheating your material first to get it melty before you begin to apply pressure.
  • Apply the pressure more slowly.

ROSITEK 2-in-1 Rosin Press for Making Brick Hash and Extraction PPM4 ( Pollen Brick Maker )

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Jurgens
Need to know

Can my Pollan press for making brick hash, also press buds to make wax or do I need a different press?

Dear Rosineers,

First of all I am very grateful to choose our products, which you can buy directly from our Amazon store from the link below.
If you are statisfied with our product and service, and you are willing to post a YouTube, Reddit tutorials or post your product review on the Amazon product page, please contact us with a screenshot or link for a amazing gift.

Buy the Branded Products from Amazon Store:

Best regards,

DABPRESS TEAM
support@dabpress.com

QUESTIONS & ANSWERS

Ask a Question
  • Are you sure these specifications are for the PPM4? (Thought it was 500 watts and had 3x5 platens) Every description I've read elsewhere states: "we do not recommend putting the paper inside of the maker." "Basically, 2x4", 2x4.5" nylon micron pressing bags and 2x4 pre-press mold or cylindrical prepress mold is a recommendation" You recommend 2x4 pre-press. 2 paragraphs later; "Please do not use press molds smaller than 3x5" to make bricks to protect them from scratching/damaging the surface" Lastly what size bags do you recommend for the 2.47"(width) x 4.36" (Length) x 1.75" (Depth) Puck the pre-press will produce?

    I am sorry for the delayed response.
    1, If you put the parchment paper inside of the mold, it is hard to take it off.
    2, If you insist on pairing it with a 2x4" prepress mold, it works. But it is a risk to scratch the working surface. The matched prepress mold is the same size as 3x5" heated plates, so it won't scratch it. 
    3, About extraction, we always recommend smashing a small amount of puck in order to get a decent yield.

Have Questions? Reach out Here

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Jurgens
Need to know

Can my Pollan press for making brick hash, also press buds to make wax or do I need a different press?

You have successfully subscribed!