DABPRESS 3x5 DIY Caged Rosin Press Kit - Build A 10-12 Ton Rosin Heat Press Machine for Personal Use
DABPRESS 3x5 DIY Caged Rosin Press Kit - Building Your Own Rosin Heat Press Machine for Personal Use
Features:
- 10mm Wood Insulator - The food-grade wood insulation, heats up to 200F for about 4-5 minutes and protects the hydraulics from overheating.
- M10 Threads in Bottom Platen - The cage can be secured on the hydraulic press for safety; No bottom plate holder is included.
- Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
- Accurate Temp Detected - Separated thermocouples and heating rods detect and deliver accurate temperature.
- Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.
Specifications:
- Temperature Range: 0-399F
- Power: 500W
- Voltage: 110V
- Platen Size: 3" x 5"
- Cube Dimensions: 3.5" x 8.6" x 5.5"
- External Package: 14.2" x 13.2" x 9.4"
- Total Weight: 14.5lbs
- Clearance between Upper and Bottom Platens: 33mm/1.3"
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheat your material first to get it melty before applying pressure.
- Apply the pressure more slowly.
3x5" Caged Rosin Press Review / We press over 1/4 pound!
Cuvée Nug Run - 10g Squeeze @190F - DP-RP35s Rosin Cube Kit
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?