Upgraded DABPRESS 4 Ton Starter Rosin Press for Home Use - 3x5 Heated Plates with Dual Detection of Heating
- Dual Heating, Dual thermocouple
- Upgraded extra machine legs, installed on top for rosin driptek, bottom to prevent the machine from falling over.
- Provide the engineer mode instruction to protect the controller from being locked.
Features:
- 3x5" Anodized Heated Platens - Capable of squeezing up to 10 grams of materials, and easy to clean the working surface.
- Excellent Thermal Insulation Effect - Reduce heat transfer with a wood insulator guarantees quick heating-up and protects the bottle jack from overheating.
- Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durable.
- Accessories Recommended - Pairs well with cylinder pre-press mold and 2x4" rosin filter, achieving and maintaining optimal pressure utilizing a vertical filter build, and a pressed puck size of 2.4 sq/in.
-
Replaceable Bottle Jack and Controller - The bottle jack and PID temp controller allow replacing easily by the end-user, so as to get a long service life.
- Temperature Range: 0-399F
- Power: 500 Watts
- Voltage: 110V
- Total Weight: 32.6 lbs
- Package Dimension: 22" x 14" x 12.6"
- Frame Dimension: (H) 45cm x (W) 22.5cm x (D) 21.5cm
- PID Temp Controller Box Dimension: (H) 15cm x (W) 11.5cm x (D) 6.8cm
- Working Surface: 3" x 5"
- The tonnage of the Original Bottle Jack: 4 Ton
- Height of Original Bottle Jack: 7.3"
- Clearance between Upper and Bottom Platens: 33mm/1.3"
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- 1pc x Electric Car Jack 5 Ton 12V
- 1pc x 4 Ton Rosin Press from Dabpress
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?