2x4 Pre Press Mold - Loading 7 to 12g Materials - Pairs 2x4 Inches Rosin Bags for Hash or Buds

Dabpress
dp-pm4007s
In stock
Prepress Molds
$69.99 $42.99
Warehouse *
$42.99
2x4" PrePress Mold Dabpress iBudtek dp-pm4007s Flower Puck Maker Made of Food Grade Anodized Aluminum - The Rectangle Puck Created Well Suited to 2-Inch Width Filter Bags [37- 160 Micron Mesh Filters]

Features:

  • Double PETP Sheet Attached - Create 7 - 12g Pucks With Included Non-Stick PETP Sheet.
  • Rectangle Pucks Created - 2x4" Pre Press Puck Mold Pairs With 2x4" or 2x4.5" Filter Bags.
  • Anodized Aluminum Made - The Mold is Anodized Into a Silver Color With Smooth Surface.
  • Won't Get Stuck - Smaller Gap Between the Mold and Ram to Prevent it From Sticking While Pre Pressing Pucks.
  • Tools To Assist - Recommend to Create Pucks With an Arbor Press or Hand Clamp to Compress; Do Not Press With Platens.
  • Hash & Flower - The Mold Well Suited to PrePress Pucks of Bubble Hash, Flower 
  • Machined Angles near to 90 Degrees - 4 Angles Close to 90 Degree for Getting Perfect Pucks.

Packing List:

  • 1 x 3-Piece Prepress Mold
  • 2 x PETP Sheet
Specifications:

  • Item No.: dp-pm4007s
  • Anodized Aluminum Made
  • The Puck Size: 40 mm (W) x 7 mm ( T) x 85 mm ( L)
  • The Puck Size: 1.57" x 0.27" x 3.34" 
  • Rectangle Puck Maker
      Rosin Bags Recommended:

      • Rosin Bags Size Paired: 2x4" and 2" Width Filters
      • 37 Micron Rosin Bags for Bubble Hash, Kief, etc
      • 90,120 and 160 Micron Bags for Flower Only
      • Rosin Bags Collection  

      # 2x4" Rosin Press Mold Everyone Calls Is Not Real 2x4 Inches. At the Matter of Fact, the Size is Smaller than REAL 2x4 Inches. For Easily Inserting the Cubic Flower or Hash Pucks into 2x4" Filter Bags, Only Smaller Pucks Allow Doing That.

      # 2x4" Rosin Press Mold Is Able to Load 7-14g Materials After Working with 2-pc PETP Tiny Plates Attached in the Package. Please Read the Instruction on the Label Putting on the Package. 

      Notice:

      • Recommend to Use Hand Clamp or Arbor Press to Assist With Pressure. 
      • Do Not Make Pucks with Heated Platens to Protect It's Working Surface

      Customer Reviews

      Based on 12 reviews
      92%
      (11)
      0%
      (0)
      8%
      (1)
      0%
      (0)
      0%
      (0)
      P
      P.D.
      Good unit

      Works great, good price

      C
      C.
      Great Prepress

      Great product, works every time, very well built, and works perfectly with dabpress driptech 10 ton press

      B
      B.D.

      2x4 Pre Press Mold - Loading 7 to 12g Materials - Pairs 2x4 Inches Rosin Bags for Hash or Buds

      B
      B.D.

      2x4 Pre Press Mold - Loading 7 to 12g Materials - Pairs 2x4 Inches Rosin Bags for Hash or Buds

      s
      s.
      Not Required

      I just pack it tight by hand...definitely works better

      Hello Stever. The 2x4' squeezes not only flower, but also hash. It requires small gap bewteen ram and shell, but it doesn't get stuck. Finally, I recommend the pre press mold pairs it with arbor press.

      How to Save Your Money?

      1, Please buy our bundled products - Learn more
      2, Please read our news about promotional products - Learn more
      3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

      Be Noted, Please!

      • Bundle order discount and our promotion code cannot be used at the same time.
      • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

      Our Policies

      QUESTIONS & ANSWERS

      Ask a Question
      • How does it heat?

        dp-pm4007s is just a puck maker.

      • The pre mold cylinder says no shake, would this be better for shake?

        It works great with the shake! Thanks for your reminding.

      • Does this work with the hydraulic presses that you sell?

        For sure! The mold will create a rectangle puck to be paired with 2x4" rosin bags. Please notice, don't press the buds with rosin press, it will scratch the surface. Irwin Clamp was recommended.

      • Are you planning on manufacturing any more of these?

        For sure, it will be available after two weeks on eBay.com (At the end of Oct,2018)

      Have Questions? Reach out Here

      Customer Reviews

      Based on 12 reviews
      92%
      (11)
      0%
      (0)
      8%
      (1)
      0%
      (0)
      0%
      (0)
      P
      P.D.
      Good unit

      Works great, good price

      C
      C.
      Great Prepress

      Great product, works every time, very well built, and works perfectly with dabpress driptech 10 ton press

      B
      B.D.

      2x4 Pre Press Mold - Loading 7 to 12g Materials - Pairs 2x4 Inches Rosin Bags for Hash or Buds

      B
      B.D.

      2x4 Pre Press Mold - Loading 7 to 12g Materials - Pairs 2x4 Inches Rosin Bags for Hash or Buds

      s
      s.
      Not Required

      I just pack it tight by hand...definitely works better

      Hello Stever. The 2x4' squeezes not only flower, but also hash. It requires small gap bewteen ram and shell, but it doesn't get stuck. Finally, I recommend the pre press mold pairs it with arbor press.

      You have successfully subscribed!