10 Ton Driptech Rosin Press - Dual 3x5 Plates, 500 Watts, Pressing 14 Grams - No Pump
10 Ton Driptech Rosin Press - 3x5 Platens 14 Grams Materials Loaded, 500 Watts - No Pump Included
Features:
- Dual Heated Platens Aligned - 4-piece linear bearings guarantee great line-up; frame Made of 6061 Aluminum, Stainless Steel Pillars,10-Ton Hydraulic Cylinder, and Durable PID Temp Controller Box.
- Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durability.
- Heat Insulation Performance - Low heat transfer bamboo insulator guarantees quick heating-up and protects the cylinder from overheating.
- 4 Magnets and 4 Feet Pad - Two magnets installed on the frame, other two magnets inside the package; 4 pieces of feet pad included in the package to prevent scratches on the working table.
- No Pump Included - The pump sold separately, buy the 10-ton pump with pressure gauge from dp-cp590g
- Temperature Range: 0-399F
- Power: 500 Watts
- Voltage: 110/220 Volts
- Total Weight: 32.1 lbs
- Package Dimension: 20.4" x 13.3" x 12.9"
- Frame Dimension: (H) 40cm x (W) 23cm x (D) 21.5cm
- PID Temp Controller Box Dimension: (H) 21.5cm x (W) 15cm x (D) 8.3cm
- Pressing Area: 3" x 5"
- Clearance between Upper and Bottom Platens: 32mm/1.26"
- Dabpress 10-ton hydraulic hand pump with gauge | dp-cp590g
- Parts needed to build your own hand pump with gauge | Read Here
- Hydraulic hand pump recommended near you | Read Here
- Add the pressure gauge to Porta Power pump | YouTube Video (1)
- Add the pressure gauge to BVA p350 pump | YouTube Video (2)
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to choose filters and prepress molds.
- The yields are not very good, why?
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing a purchase).
User Manual & Troubleshooting Includes:
QUESTIONS & ANSWERS
Ask a Question-
Can I just use an air compressor instead?
Thanks for reaching out. Since it attaches 10-ton hydraulic cylinder, so it can't be powered with the air compressor. If you mean the foot pump with the air compressor, it is no issue. -
what is the power wattage per plate?
250 watts per heating rods, 500 watts in total. It reaches setting temp about 4 mins. Thank you!
-
When are you going to start getting some of these presses back in stock? Half of your inventory has been gone for a while. The European plug model doesn't help.
10-Ton hydraulic cylinder rosin press is available now. Thank you!
-
How do you use this to make wax ? Are there complete instructions on how to use this machine
Thanks for your question! It is a solventless extractor to flower,bubble hash,dry sift etc.
-
I have the dp-bj6t35 and use pre cut 7x10 inch wide parchment paper. This press looks less wide, will 7 inch wide parchment fit? Thanks
Hello! Thanks for your reaching out right here. I recommend you pre-fold the parchment paper into a tube. When you see the rosin coming out, please tilt the unit forward (driptech). The rosin will drip on the paper under the unit.
-
Can you get this with the 3x7 cage plates?
Thanks for your question! We can't rebuild it into 3x7" plates.
-
What would I need to get it to work with the pump linked to in this question? Just got mine and can't find any of the suggested pumps in stock: https://www.prolinemax.com/MH3-Manual-10000-PSI-Air-Hydraulic-Hand-Pump-Pressure-auge-72-Hose-Coupler_p_2712.html
Dear Michael, Thanks for your reaching out right here. I got the response from Stongway Support. 10-Ton hydraulic pump with a pressure gauge will be available on Mid-January, 2019. Could you please start pressing with stongway 10 ton pump without a gauge? and you can replace it once the pump with gauge is available? Merry Christmas! Best regards, Dabpress Team
-
I have the Strongway pump that is recommended to buy what PSI on the gauge should it be reading while I am pressing flower?
It depends on how big is your pucks. Usually, 4k-5k is the normal psi at the end of rosin bags.
-
Is in this product realy no pump included? I cant find a pump on your site seperate.
Pump Recommended:
To North America Customer - Hydraulic Pump with Gauge and Hose - 10-Ton Capacity $79.99 | Buy Strongway Pump with Guage Off Amazon $79.99 | Buy Strongway Pump with Guage Off Northen Tool $49.74 | Porta Power Pump w/o Gauge Off eBay.com To Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power
£90.00 | Buy Porta Power Pump with Gauge Off eBay.co.uk €57.81 | HBM 10 Ton Hydraulic Pump with Manometer To Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge $101 | Buy The Pump with Gauge Off Aliexpress.com AU $401.99 | Electric Driven Hydraulic Pump 10000 PSI 70Mpa