Sale

10 Ton Driptech Rosin Press - Dual 3x5 Plates, 500 Watts, Pressing 14 Grams - No Pump

LUKPRESS
lphr10t35v-us
In stock
$499.00 $469.00
Warehouse *
$469.00

10 Ton Driptech Rosin Press - 3x5 Platens 14 Grams Materials Loaded, 500 Watts - No Pump Included

Well Noted, Please!

  • 10-ton hydrualic cylinder rosin press to Canada with DABPRESS logo
  • 10-ton hydrualic cylinder rosin press to USA with LUKPRESS logo

Features:

  • [ Dual Heated Platens Well Aligned ] > 4-piece linear bearings support dual heated plate to move on the 4 pieces of stainless steel evenly.
  • [ 10-ton Pressure Durable Frame ] >  The frame is made of 6061 aluminum, 4 pieces of stainless steel posts, and a PID temp controller box.
  • [ Excellent Thermal Insulation Effect ] > Low heat transfer bamboo insulator guarantees quick heating-up and protects the cylinder from overheating.
  • [ 4PC Magnets & 4PC Feet Pad ] >Two magnets installed on the frame, other two magnets inside the package; 4 pieces of feet pad included in the package to prevent scratches on the working table.
  • [ No Pump Included ] > To offer a pair of NPT 1/4" couplers in the tool bags located in the package ( please keep it for future use ), but the relative pump sold separately, please buy the 10-ton pump from  dp-cp590g
Specifications:

  • Temperature Range: 0-399F 
  • Power: 500 Watts
  • Voltage: 110v / 220v
  • Total Weight: 32.1 lbs
  • Package Dimension: 20.4" x 13.3" x 12.9"
  • Frame Dimension: (H) 40cm x (W) 23cm x (D) 21.5cm
  • PID Temp Controller Box Dimension: (H) 21.5cm x (W) 15cm x (D) 8.3cm
  • Working Surface: 3" x 5"
  • Clearance between Upper and Bottom Platens: 32mm/1.26"
      Pumps for Pairing:

      • LUKPRESS 10-ton hydraulic hand pump with gauge | dp-cp590g
      • Parts needed to build your own hand pump with gauge | Read Here
      • Hydraulic hand pump recommended near you | Read Here 
      • Add the pressure gauge to Porta Power pump | YouTube Video (1)
      • Add the pressure gauge to BVA p350 pump | YouTube Video (2)

      How to Avoid the Filter Bags from Blowing out?

      • Remove excess stems from flowers.
      • Use less material in your filter bag.
      • Preheating your material first to get it melty before you begin to apply pressure.
      • Apply the pressure more slowly.

      Precaution for Use:

      • My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why? - Learn More
      • Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back - Learn More
      1 - LUKPRESS 10 Ton Initial Product Review


      2 - LUKPRESS 10 Ton Driptech Rosin Press - Reviewed by Endo Grows


      3 - LUKPRESS - 25% Return Baby!!

          Customer Reviews

          Based on 199 reviews
          92%
          (183)
          7%
          (14)
          1%
          (1)
          0%
          (0)
          1%
          (1)
          J
          Jack
          Press is good but pump is finicky.

          The press does a good job however the pump needs bleeding upon every use. It consistently loses pressure and one must bleed it for every press in order to hold pressure. I suspect my pump may be defective.

          J
          Jared Davis
          This is exactly what I wanted.

          This press is badass! I love it!!!! Dabpress crew Hooked it up and answered all my questions and made sure I got all the way together.
          Really could not be happier!
          Thanks so much

          D
          David Austin
          10T Unit is perfect

          Very nicely built self-contained press. No issues, works flawlessly. Way overbuilt will last a long time.

          D
          Daniel Sepeda

          Absolutely love it

          J
          Josh Allen
          I love it.

          I have used the press abut 4 or 5 times now. It is everything I wanted it to be. Great price and quality build!

          Dear Rosineers,

          First of all I am very grateful to choose our products, which you can buy directly from our Amazon store from the link below.
          If you are statisfied with our product and service, and you are willing to post a YouTube, Reddit tutorials or post your product review on the Amazon product page, please contact us with a screenshot or link for a amazing gift.

          Buy the Branded Products from Amazon Store:

          Best regards,

          DABPRESS TEAM
          support@dabpress.com

          QUESTIONS & ANSWERS

          Ask a Question
          • Can I just use an air compressor instead?


            Thanks for reaching out. Since it attaches 10-ton hydraulic cylinder, so it can't be powered with the air compressor. If you mean the foot pump with the air compressor, it is no issue.

          • what is the power wattage per plate?

            250 watts per heating rods, 500 watts in total. It reaches setting temp about 4 mins. Thank you!

          • When are you going to start getting some of these presses back in stock? Half of your inventory has been gone for a while. The European plug model doesn't help.

            10-Ton hydraulic cylinder rosin press is available now. Thank you!

          • How do you use this to make wax ? Are there complete instructions on how to use this machine

            Thanks for your question! It is a solventless extractor to flower,bubble hash,dry sift etc.

          • I have the dp-bj6t35 and use pre cut 7x10 inch wide parchment paper. This press looks less wide, will 7 inch wide parchment fit? Thanks

            Hello! Thanks for your reaching out right here. I recommend you pre-fold the parchment paper into a tube. When you see the rosin coming out, please tilt the unit forward (driptech). The rosin will drip on the paper under the unit.

          • Can you get this with the 3x7 cage plates?

            Thanks for your question! We can't rebuild it into 3x7" plates. 

          • What would I need to get it to work with the pump linked to in this question? Just got mine and can't find any of the suggested pumps in stock: https://www.prolinemax.com/MH3-Manual-10000-PSI-Air-Hydraulic-Hand-Pump-Pressure-auge-72-Hose-Coupler_p_2712.html

            Dear Michael, Thanks for your reaching out right here. I got the response from Stongway Support. 10-Ton hydraulic pump with a pressure gauge will be available on Mid-January, 2019. Could you please start pressing with stongway 10 ton pump without a gauge? and you can replace it once the pump with gauge is available? Merry Christmas! Best regards, Dabpress Team 

          • I have the Strongway pump that is recommended to buy what PSI on the gauge should it be reading while I am pressing flower?

            It depends on how big is your pucks. Usually, 4k-5k is the normal psi at the end of rosin bags.

          • Is in this product realy no pump included? I cant find a pump on your site seperate.

            Pump Recommended: 

            To North America Customer -  Hydraulic Pump with Gauge and Hose - 10-Ton Capacity $79.99 |  Buy Strongway Pump with Guage Off Amazon  $79.99 |  Buy Strongway Pump with Guage Off Northen Tool $49.74 | Porta Power Pump w/o Gauge Off eBay.com To Europe Customer - 10 TON Hydraulic Hand Pump Hose & Gauge Porta Power 

            £90.00 | Buy Porta Power Pump with Gauge Off eBay.co.uk €57.81 | HBM 10 Ton Hydraulic Pump with Manometer To Australia Customer - Manual Hydraulic Pump Aluminum Alloy with gauge $101 | Buy The Pump with Gauge Off Aliexpress.com AU $401.99 | Electric Driven Hydraulic Pump 10000 PSI 70Mpa

          Have Questions? Reach out Here

          Customer Reviews

          Based on 199 reviews
          92%
          (183)
          7%
          (14)
          1%
          (1)
          0%
          (0)
          1%
          (1)
          J
          Jack
          Press is good but pump is finicky.

          The press does a good job however the pump needs bleeding upon every use. It consistently loses pressure and one must bleed it for every press in order to hold pressure. I suspect my pump may be defective.

          J
          Jared Davis
          This is exactly what I wanted.

          This press is badass! I love it!!!! Dabpress crew Hooked it up and answered all my questions and made sure I got all the way together.
          Really could not be happier!
          Thanks so much

          D
          David Austin
          10T Unit is perfect

          Very nicely built self-contained press. No issues, works flawlessly. Way overbuilt will last a long time.

          D
          Daniel Sepeda

          Absolutely love it

          J
          Josh Allen
          I love it.

          I have used the press abut 4 or 5 times now. It is everything I wanted it to be. Great price and quality build!

          You have successfully subscribed!