DABPRESS 30mm SS Hammer Pollen Press | PM30S | 304 Stainless Steel Pre-Press Mold for Flower, Hash & Kief
You Save: $5.00 (12%)
Tips:
DABPRESS 30MM SS HAMMER-STYLE POLLEN PRESS
Original Heavy-Duty Design | 304 Stainless Steel | 0.15mm Ultra-Tight Tolerance
The Precision Prep: The Professional’s Secret to High Yields
The DABPRESS PM30S (dp-pm30s) is our signature original pre-press mold, engineered for enthusiasts who demand efficiency. By transforming loose Flower, Kief, or Hash into a high-density puck, you create a uniform surface that ensures even heat distribution and maximum oil flow. Crafted from heavy-duty 304 Stainless Steel, this tool is built to withstand a lifetime of heavy use while eliminating material waste.
Product Highlights & Core Features
- Industrial-Grade Precision: Featuring a 0.15mm ultra-tight gap between the plunger and cylinder, ensuring no fine particles or kief escape during the hammer-strike process.
- Hammer-Style Power: Designed for impact. Simply load your material and use a rubber mallet to generate massive instantaneous pressure without the need for a hydraulic press.
- Sustainable Cost Savings: Perfectly sized for 2x4.5" rosin bags. By pre-pressing, you can cut your bags in half (Bottle Tech style), effectively doubling your bag supply.
- PVC Loading Sheet Included: Includes a proprietary PVC sheet to help you slide compressed pucks into filter bags smoothly, preventing mesh snags and ensuring a perfect fit.
Expert Advice: The Pre-Press Master Protocol
Maximize your "Liquid Gold" output with these professional community tips:
- The "Warm Mold" Technique: Place your stainless steel mold on your heat plates for a few minutes (120°F) before pressing. Warm material compresses into a much sturdier, "non-crumbly" puck.
- Stem Removal: Always clear flowers of sharp stems before loading the mold. Even a pre-pressed puck can cause a blowout if a hidden stem pierces the filter bag.
- Optimal Loading: For best results, load between 3.5g to 7g of material. This creates the ideal puck thickness for the 30mm diameter, ensuring the best oil-to-surface-area ratio.
DABPRESS Pre-Press Series - 4 Core Models Comparison
| Dimension | Cylinder PrePress | Rectangle PrePress | Bag & Mold Bundle | Brick PrePress |
|---|---|---|---|---|
| Official Name | PM30S | PM4007S | COMBO2 | PPM2 |
| Tool Type | 3-Piece Mold | 3-Piece Mold | Starter Kit | Hand-Lever Press |
| Pressure Source | Impact / Press Req. | Rosin Press Req. | Manual Hand-Grip | High-Leverage Handle |
| Rec. Capacity | 3.5g - 7g | 14g - 28g | 3.5g - 7g | 14g - 56g (2 oz) |
| Puck Shape | Round (Cylinder) | Rectangle | Round (Cylinder) | Brick (High-Density) |
| Material | 304 Stainless Steel | Anodized 6061 Alu | Stainless Steel/Alu | Heavy-Duty Steel/Alu |
| Best Paired With | 3x5" / 4x7" Plates | 4x7" / 3x7" Plates | 3x3" / 3x5" Plates | Commercial Setup |
| Main Advantage | Most Compact | Large Batch King | All-in-One Entry | Bulk Compression |
Watch & Learn: PM30S in Action
Technical Specifications (PM30S)
| Material | Food-Grade 304 Stainless Steel |
| Inner Diameter | 1.18" (30mm) |
| Product Height | 3.38" (86mm) |
| Tolerance | 0.15mm Ultra-Tight Gap |
The "Zero-Blowout" Protocol
- Uniform Density: Ensure your puck is pressed evenly via a rubber mallet. A tilted puck causes uneven pressure.
- Puck Centering: Center your pre-pressed puck perfectly on the heat plates for balanced force.
- The Slow Squeeze: Apply "contact pressure" for 30 seconds to allow softening before full extraction.
- Maintenance: Dishwasher safe. Use 99% ISO alcohol to keep the 0.15mm tolerance precise.
USA LOCAL DELIVERY
Ships from our US Local Warehouse (CA / PA).
Estimated 3-5 Business Day delivery to Lower 48 States.
Troubleshooting Collection:
In order to provide rosineer with the best experience, we collected the past complaints in the list; I would also consider it will be helpful for you. We also especially look forward to you sharing your suggestions and comments, and the issues you have encountered to us via support@dabrpess.com (updating).
- My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
- Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
- My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
- Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?
- Piston Rod of Hydraulic Cylinder Rosin Press Can Lift But It Can Not Move Back
- I Would Like to Upgrade Dabpress Rosin Press, Is This possible and Which Parts Would I Need?
- How to Replace the Bottle Jack?
- About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?
- How to Replace PID module?
- My Temp Controller Box Caused the Issue After Changing the Parameters, How to Fix It?
