Sale

DABPRESS 3x5 Uncaged Rosin Plates DIY - Build A 10-12 Ton Hydraulic Press - Bottom Plate Holder Included

DABPRESS
dp-rp35-us
In stock
$399.00 $199.00
Warehouse *
$199.00
DABPRESS 3x5 Rosin Heat Plates DIY - Build A 10-12 Ton Hydraulic Press - Bottom Plate Holder Included

Features:

  • [ Alignment & Safety ] > Upgraded edition 3x5" uncaged kit allows the bottom platen to secure on the hydraulics for alignment and safety in the process of working.
  • [ Innovative 8mm Slim Insulator ] > SGS certified food grade Insulation, heats up to 200F for about 4-5 minutes and protects the hydraulics from overheating.
  • [ 3x5" Heated Platens ] > 3x5" size platen suited to squeeze 3.5-28g materials at a time.
  • [ Food-grade Working Surface ] > Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
  • [ Accurate Temperature Detected ] > Accurate temperature delivered through independent heating rods and thermocouples.
  • [ Long Working Life Guaranteed ] > The heating rods have a service life of more than 6,000 times.

Specifications:

  • Temperature Range: 0-399F  
  • Voltage: 110/220V 
  • Power: 500W
  • Plate Size: 3" x 5" 
  • External Package: 14.0" x 14.0" x 6.1"
  • Gross Weight: 9.5lbs
    Instructions to Secure Bottom Platen to Hydraulic Press Frame:

    1. Install the top heated plates onto the ram of the hydraulic press.
    2. Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached it to the worktable plate.
    3. Lower the ram on the hydraulic press just until both plates touch.
    4. Adjust the position of the plates if necessary, so they are aligned.
    5. Insure bamboo plank is aligned under the bottom plate.
    6. Tighten the nut on the long threaded rod to secure it to the worktable plate below.

    How to Avoid the Filter Bags from Blowing out?

    • Remove excess stems from flowers.
    • Use less material in your filter bag.
    • Preheating your material first to get it melty before you begin to apply pressure.
    • Apply the pressure more slowly.

      1 - How to Attach the Bottom Rosin plate to the Rosin Press

      2 - Rosin Plates Unboxing and New DIY Rosin Press Build Your Own Dabs from Home

            Customer Reviews

            Based on 34 reviews
            97%
            (33)
            3%
            (1)
            0%
            (0)
            0%
            (0)
            0%
            (0)
            J
            Jake F
            Excellent experience

            So far I've pressed about 50 to 60 times and I've had a excellent experience every time. Customer service has been exceptional as well. I had a issue with a pid controller and they walked me through a troubleshooting process and confirmed the issue. Sent me a new part promptly and had it working within minutes. A++

            J
            John Miller
            Good stuff

            Everything worked good great packing

            D
            Daniel Verhagen

            Works great High quality

            Y
            Yannick Tremblay
            Quality product for amazing price!

            Shipping free and fast. Everything is wired and assembled, just plug'n'press. Thanks for the freebies.

            w
            william shannon
            Excellent kit for personal pressing!

            Amazing kit for the price. Came packaged very well, easy to attach to my press, and works as good as a noob like me can expect.

            Dear Rosineers,

            First of all I am very grateful to choose our products, which you can buy directly from our Amazon store from the link below.
            If you are statisfied with our product and service, and you are willing to post a YouTube, Reddit tutorials or post your product review on the Amazon product page, please contact us with a screenshot or link for a amazing gift.

            Buy the Branded Products from Amazon Store:

            Best regards,

            DABPRESS TEAM
            support@dabpress.com

            QUESTIONS & ANSWERS

            Ask a Question
            • Will this mount to a arbor press? . Also would the caged rosin plates work with a arbor press?

              Thanks for your question!  1, Whether the arbor press offer enough space to put dp-rp35 or not. 2, How much pressure will the arbor press deliver? I suggest there are less 3 ton force of pressure to be paired with rosin cage kit. 3, 1,000 psi is ideal pressure in pratice. Try to find A/H frame hydraulic shop press if you could.

            Have Questions? Reach out Here

            Customer Reviews

            Based on 34 reviews
            97%
            (33)
            3%
            (1)
            0%
            (0)
            0%
            (0)
            0%
            (0)
            J
            Jake F
            Excellent experience

            So far I've pressed about 50 to 60 times and I've had a excellent experience every time. Customer service has been exceptional as well. I had a issue with a pid controller and they walked me through a troubleshooting process and confirmed the issue. Sent me a new part promptly and had it working within minutes. A++

            J
            John Miller
            Good stuff

            Everything worked good great packing

            D
            Daniel Verhagen

            Works great High quality

            Y
            Yannick Tremblay
            Quality product for amazing price!

            Shipping free and fast. Everything is wired and assembled, just plug'n'press. Thanks for the freebies.

            w
            william shannon
            Excellent kit for personal pressing!

            Amazing kit for the price. Came packaged very well, easy to attach to my press, and works as good as a noob like me can expect.

            You have successfully subscribed!