Best Rosin Press for Kief - ROSITEK PPM4 4-Ton Rosin Heat Press Machine
ROSITEK 2-in-1 Rosin Press for Making Brick Hash and Flower Extraction - 4 Ton Pressure, Pollen Press Mold Including Dual 3x5 Inch Heated Plates and 4-ton Bottle Jack.
As a Heat Press Used to Extract - It contains a 4-ton welded bottle jack and dual 3x5" heated platen, and this small heat press machine is capable of smashing up to 14 grams of flower or fine materials at a time. Basically, 2x4", 2x4.5" nylon micron pressing bags and 2x4 pre-press mold or cylindrical prepress mold is a recommendation.
As a Heat Press for Pollen Brick - It comes with a set of 3-piece design pollen press molds. After loading the fine material, you are able to prepress it with a clamp vise, and then put the mold between the heated plates, simply push it until the four corners are aligned. To utilize good heat transfer of aluminum to melt the material, at the same time, please apply pressure slowly, after a while, you will get a perfect brick.
Caution During the Extraction - (1) Please do not use press molds smaller than 3x5" to make bricks to protect them from scratching/damaging the surface. so we only recommend pairing the included press mold with the heat press machine. (2) It is not recommended to modify the default setting of the PID controller to cause inaccurate temp delivered. (3) Please do not replace jacks exceeding 4 tons to cause damage to the machine.
About 3-Piece Pollen Brick Maker - It is made of 6061 aluminum, 3 pieces in total, the thickness of the finished brick is not limited. [Internal dimension of maker: 2.47"(width) x 4.36" (Length) x 1.75" (Depth)]. We recommend putting the parchment paper between the material and ram/tray in order to take off the pollen brick easily.
About the 4-Ton Heat Press Machine - No extra equipment required. This is a complete, portable, personal heat press machine that contains a customized bottle jack and an upgraded PID temperature controller box. The accurate temp detection and delivery and well-holding pressure were the most important things in mind. Without a doubt, replaceable parts and the pluggable controller is great feature to improve the buying experience.
Maximum Pressure: 4 Ton
Heating Plate Size: 3 x 5"
Temperature Range: up to 203 °C / 399 °F
Temperature Scale: Fahrenheit
Clearance between upper and bottom Plate:
Dimension of the Mold:
Please do not use press molds smaller than 3x5" to make bricks to protect them from scratching/damaging the surface. so we only recommend pairing the included press mold with the heat press machine.
It is not recommended to modify the default setting of the PID controller to cause inaccurate temp delivered.
Please do not replace jacks exceeding 4 tons to cause damage to the machine.