Large Cylinder Pre Press Mold ( 40mm Round Puck ) - Stainless Steel Made, Works with 2.5x4.5 Filters

Dabpress
dp-pm40r-us
In stock
Cylinder Pre Press Mold
$69.99 $48.99
Warehouse *
$48.99
Large Cylinder Pre Press Mold ( 40mm Round Puck ) - Stainless Steel Made, Works with 2.5x4.5 Filters
 
Features:

  • 7-14g Material Loaded - Pairs it well with Irwin clamp, arbor press or a rubber mallet.
  • Durable Pre Press Mold - Excellent wear resistance, much better than aluminum mold.
  • PVC Sheet Included - Easy to insert pucks into filter bags with PVC sheet attached.
  • 3-piece Designed Mold - Made of 3-piece of food-grade 304 stainless steel.

Specifications:

  • Item No.: dp-pm40r 
  • 304 Stainless Steel Made 
  • Inner Diameter: 1.57 inch (40mm )

    How to Avoid Filter Bags from Blowing out?

    • Remove excess stems from flowers.
    • Use less material in your filter bag.
    • Preheating your material first to get it melty before you begin to apply pressure.
    • Apply the pressure more slowly.
    Manual & Troubleshooting Includes:

    • How to start
    • Recommendations on materials loaded.
    • Rosin filter bags suggested.
    • The yields are not very good, why?
    • How to apply the pressure for optimal yield and quality?
    • How to begin extracting.
    • Important notice.
    • Troubleshooting.
    • Question and answer.
    • Check it out here (Highly recommended to read it before doing purchase)

        Customer Reviews

        Based on 8 reviews
        100%
        (8)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        K
        K.
        Wouldn't press without one!
        R
        R.
        Makes The Process Easier
        A
        A.
        C
        C.
        Works Prefect for Pucks
        N
        N.D.

        QUESTIONS & ANSWERS

        Ask a Question
        • What are the plastic sheets included used for?

          They can be cut or folded to help you open the filters for loading your material more quickly.

        • Can I use a hammer or mallet to compress the pucks?

          Yes!  Please use a rubber mallet to prevent scratching your plunger.

        • Do I need to use filter bags for flowers?

          No, you can press single flowers and get great results, you can also use the pre press molds to form pucks to press without the use of filters.  Keep in mind when not using filters that the puck will expand a bit larger.

        • Can I re-press my pucks?

          Yes!  Simply fold the puck in half and re-press it.  You might have to use higher temperature to get an extraction.

        • What Humidity level should my flower be stored in?

          62% is the recommended stable relative humidity (RH) inside of your flower container.

        • Can I compress the pucks using my arbor press?

          Yes, though be careful not to apply too much pressure onto aluminum surface directly.

        • What is the recommended minimum amounts loaded?

          For the 30mm molds, 3.5g, for the 40mm mold, 7g.

        • How to avoid the filter bags from blowing out?

          Remove excess stems from flowers; Use less material in your filter bag; Preheating your material first to get it melty before you begin to apply pressure; Apply the pressure more slowly.

        • Can the dp-pm40r be used to press buds to pucks by hand?

          By hands, Irwin Clamp or Arbor press.

        • Is this the rosin extractor or do you sell rosin extractors the slug rosin extractor 33

          Dear Rob, Many thanks for your reaching out. dp-pm40r is only a prepress mold, a puck maker. Best regards, Dabpress Team 

        • You do not give the sizes of the dabpress dppm 4007

          Item No.: dp-pm4007s Anodized Aluminum Made The Puck Size: 40 mm (W) x 7 mm ( T) x 85 mm ( L) The Puck Size: 1.57" x 0.27" x 3.34"  Rectangle Rosin Puck Maker

        • Hi, When will this item be back in stock?

          Thanks for your reaching out here! I apology to stop this item since we start to produce 2-in-1 rosin puck maker, it will create 45mm diameter pucks and 2x3" rectangle pucks. But it will be available after 15 days.

        Have Questions? Reach out Here

        Customer Reviews

        Based on 8 reviews
        100%
        (8)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        K
        K.
        Wouldn't press without one!
        R
        R.
        Makes The Process Easier
        A
        A.
        C
        C.
        Works Prefect for Pucks
        N
        N.D.
        You have successfully subscribed!