DABPRESS 3/8" Coupler Reducer Kit - A Pair of Couplers and A Piece of Reducer Included - 3PC in Total
Features:
-
Complete Kit - Including 1pc reducer and a pair of couplers for connection with a pump with 3/8" male fitting on the hose.
-
A Pair of Couplers - We recommend removing the original male fitting on the hydraulic hose you had with the attached male coupler for nice working if possible.
-
Teflon Tape Included - Including a pack of Teflon tape in the package.
Packing List:
- A piece of hydraulic cylinder reducer from male 1/4" to female 3/8"
- A pair of NPT 3/8" coupler
- A pack of Teflon tape
Tips:
- Due to the 10 & 12-ton heat press including a 1/4" NPT coupler ( 1/4" NPT threads on the cylinder ), so it doesn't allow connecting a pump with 3/8" NPT male on the hose. But removing the female coupler on the cylinder and replacing it with 3/8" coupler reducer kit, it is able to work to a 3/8" pump.
- 10, 12-ton heat press is unable to connect a pump with NPT 3/8" male coupler on the hydraulic hose directly.
- For connection with a 3/8" pump, we offer the kind of 3/8" coupler reducer kit for the process.
- For the safety process, please put the paddleboard on the working table, do not operate the unit on foot.
Instructions to Install This Kit:
- Simply remove the original NPT 1/4" female coupler on the cylinder of the heat press.
- Install the reducer kit after rolling Teflon tape into the hydraulic cylinder ( 3/8" female coupler already installed on the reducer ).
- Please connect your 3/8" pump to the unit to check out whether the unit works or not.
- If the cylinder doesn't work well, we recommend replacing the original male coupler on the hydraulic hose with the male coupler we included.
Build An Automatic Rosin Press with 10 & 12 Ton Heat Press:
1. Electric Hydraulic Pump:
- Most of the durable electric pumps offer NPT 3/8" coupler. So we won't recommend a pump with NPT 1/4" coupler here.
- Required equipment - Electric hydraulic pump kit & 3/8" coupler reducer kit.
- About how to build it, please learn more from the Blog Post.
2 Pneumatic Hydraulic Pump:
- We recommend NPT 3/8" and 1/4" air hydraulic pump ( air compressor + pneumatic hydraulic pump ) to build an automatic rosin press.
- Required equipment - Air/hydraulic pump & Air compressor.
- About how to build it, please learn more from the Blog Post.