2-in-1 4-Ton Hydraulic Heat Press Machine for Pollen Brick and Extraction - Including Dual 3x5 Inch Heated Plates and Large Heatable Press Mold
[ As a Heat Press Used to Extract ] > It contains a 4-ton welded bottle jack and dual 3x5" heated platen, so this small heat press machine is capable of smashing up to 14 grams of flower or fine materials at a time. Basically, 2x4", 2x4.5" nylon micron pressing bags and 2x4 pre-press mold or cylindrical prepress mold is a recommendation.
[ As a Heat Press for Pollen Brick ] > It comes with a set of 3-piece design pollen press mold. After loading the fine material, you need to prepress it with a clamp vise, and then put the mold between the heated plates, simply push it until the four corners are aligned. To utilize good heat transfer of aluminum to melt the material, at the same time, please apply pressure slowly, only 30-60 seconds long, you will get a perfect brick.
[ Caution During the Extraction ] > (1) Please do not use press molds smaller than 3x5" to make bricks to protect them from scratching/damaging the surface. so we only recommend pairing the included press mold with the heat press machine. (2) It is not recommended to modify the default setting of the PID controller to cause inaccurate temp delivered. (3) Please do not replace jacks exceeding 4 tons to cause damage to the machine.
[ About 3-Piece Pollen Brick Maker ] > It is made of 6061 aluminum, 3 pieces in total, the thickness of the finished brick is not limited. [Internal dimension of maker: 2.47"(width) x 4.36" (Length) x 1.75" (Depth)]. We recommend putting the parchment paper between the material and ram/tray in order to take off the pollen brick easily.
[ About the 4-Ton Heat Press Machine ] > No extra equipment required. This is a complete, portable, personal heat press machine that contains a customized bottle jack and an upgraded PID temperature controller box. The accurate temp detection and delivery and well-holding pressure were the most important things in mind. Without a doubt, replaceable parts and the pluggable controller is a great feature to improve the buying experience.
- Temperature Range: 0-399F
- Power: 300 Watts
- Voltage: 110v/220v
- Total Weight: 000 lbs
- Package Dimension: 0" x 0" x 0"
- Frame Dimension: (H) 0x (W) 0x (D) 0
- Working Surface: 3" x 3"
- Clearance between Upper and Bottom Platens:
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.