3x5 Uncaged Rosin Plates DIY - Build A 10-12 Ton Hydraulic Press - Bottom Plate Holder Included
- Alignment & Safety - Upgraded version 3x5" uncaged kit allows the bottom platen to secure on the hydraulics for alignment and safety in the process of working.
- Innovative 8mm Slim Insulator - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
- 3x5 Heated Platens - 3x5" size platen suited to squeeze 3.5-28g materials at a time.
- Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
- Accurate Temperature Detected - Accurate temperature delivered through independent heating rods and thermocouples.
- Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.
Specifications:
- Temperature Range: 0-399F
- Voltage: 110/220V
- Power: 500W
- Plate Size: 3" x 5"
- External Package: 14.0" x 14.0" x 6.1"
- Gross Weight: 9.5lbs
- Install the top heated plates onto the ram of the hydraulic press.
- Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
- Lower the ram on the hydraulic press just until both plates touch.
- Adjust the position of the plates if necessary, so they are aligned.
- Insure bamboo plank is aligned under the bottom plate.
- Tighten the nut on the long threaded rod to secure it to the worktable plate below.
How to Avoid the Filter Bags from Blowing out?
- Remove excess stems from flowers.
- Use less material in your filter bag.
- Preheating your material first to get it melty before you begin to apply pressure.
- Apply the pressure more slowly.
- How to choose filters and prepress molds.
- The yields are not very good, why?
- How to install the DIY press plates kits
- How to choose hydraulic press for pairing
- How to apply the pressure for optimal yield and quality?
- How to begin extracting.
- Important notice.
- Troubleshooting.
- Question and answer.
- Check it out here (Highly recommended to read it before doing a purchase).
User Manual & Troubleshooting Includes:
QUESTIONS & ANSWERS
Ask a Question-
Will this mount to a arbor press? . Also would the caged rosin plates work with a arbor press?
Thanks for your question! 1, Whether the arbor press offer enough space to put dp-rp35 or not. 2, How much pressure will the arbor press deliver? I suggest there are less 3 ton force of pressure to be paired with rosin cage kit. 3, 1,000 psi is ideal pressure in pratice. Try to find A/H frame hydraulic shop press if you could.