4x7 DIY Uncaged Press Plates Kit - Build A 12-30 Ton Rosin Press - Bottom Plate Holder Included

In stock
Uncaged Press Plates
$429.00 $319.00
Warehouse *
4x7 Rosin Plates - 1,200 Watts - Build Your Own 20-30 Ton Hydraulic Rosin Press


  • Alignment & Safety - Upgraded version 4x7" uncaged kit allows the bottom platen to secure on the hydraulics for alignment and safety in the process of working.
  • Innovative 8mm Slim Insulator - SGS certified food grade Insulation, heats up to 200F about 4-5 minutes and protects the hydraulics from overheating.
  • 4x7" Heat Press Platens - Well suited to squeeze large amount at a time for industrial use; Pairs it well with a 20-ton hydraulic shop press
  • Food-grade Working Surface - Dual heated platens made of anodized 6061 aluminum guaranteed to clean up easily.
  • 4pc Heating Rods - Quick and even heating up with 1,200w PID temp controller box. 
  • Long Working Life Guaranteed - The heating rods have a service life of more than 6,000 times.


  • Temperature Range: 0-399F 
  • Voltage: 110/220V
  • Power: 1,200W
  • Each Heater: 300W
  • Plate Size: 4" x 7" 
  • Gross Weight: 13.86Lbs

    Instructions to Secure Bottom Platen to Hydraulic Press Frame:

    1. Install the top heated plates onto the ram of the hydraulic press.
    2. Install the bottom heated plate using the long threaded rod through the bamboo insulation, then attached to the worktable plate.
    3. Lower the ram on the hydraulic press just until both plates touch.
    4. Adjust the position of the plates if necessary, so they are aligned.
    5. Ensure bamboo plank is aligned under the bottom plate.
    6. Tighten the nut on the long threaded rod to secure it to the worktable plate below.

    How to Avoid the Filter Bags from Blowing out?

    • Remove excess stems from flowers.
    • Use less material in your filter bag.
    • Preheating your material first to get it melty before you begin to apply pressure.
    • Apply the pressure more slowly.
    Manual & Troubleshooting Includes:

    • How to choose filters and prepress molds.
    • The yields are not very good, why?
    • How to install the DIY press plates kits
    • How to choose hydraulic press for pairing
    • How to apply the pressure for optimal yield and quality?
    • How to begin extracting.
    • Important notice.
    • Troubleshooting.
    • Question and answer.
    • Check it out here (Highly recommended to read it before doing a purchase).

        Customer Reviews

        Based on 15 reviews
        Works great with 20 ton press

        Had a 20 ton shop press. Bought this item and was making rosin as soon as I got it. All the accessories work great with my press without mods. I really appreciated the bamboo insulator and silicone sheet.

        Dabpress is Awesome

        Works fantastic, always a great result. Dab away my friend

        Works great

        Recommend it

        Nice stuff

        I have only had my plates for a week and they seem to be very nice. But I do Have a 5° fluctuation on one of the plates it keeps going bouncing between the 5° but seems to be working very good I think a piece of insulation underneath that plate will fix everything

        Dear Mr. Thomas, Thanks for your unbiased product review. From the image you attached, it looks you forgot putting ' Bamboo Insulator Included' between the bottom plates and working table of bench press. I consider it will fix the issue caused. Regards, Dabpress Team
        Awesome Product

        Really impressed with your product.Plates are finished really well , and PID Controller is accurate.Cable's are well insulated .Also rapid delivery.
        Good work, i will definitely be back in the future.

        User Manual & Troubleshooting Includes:

        - Recommendations on Materials Loaded
        - How to Begin Extracting
        - How to Start
        - Installation
        - Important Notices
        - Questions & Answers
        - Troubleshooting

        User Manual List:

        1, Cylinder Pre Press Mold 
        2, 2X4" Pre Press Mold 
        3, DIY Uncaged Press Plates Kit 
        4, Bottle Jack Styled Rosin Press 
        5, DIY Caged Press Plates Kit 
        6, Hydraulic Cylinder Styled Rosin Press 
        7, Rosin Bags & Combo 
        8, Hydraulic Hand Pump with Gauge 


        Have a Question?

        Be the first to ask a question about this.

        Ask a Question
        Have Questions? Reach out Here
        You have successfully subscribed!