4 Ton Starter Rosin Press - 3x5 Heated Platens - 7-10g Materials Loaded - Upgrade from 3-Ton Press

In stock
Complete Rosin Press
$449.00 $369.00
Warehouse *

4 Ton Starter Rosin Press - 3x5 Heated Platens - 14g sift or 10g flower with 4-ton heat press


  • 3x5" Anodized Heated Platens - Well suited to squeeze 7-10g materials; easy to clean and the best flavor for vaping.
  • Heat Insulation Performance - Low heat transfer bamboo insulator guarantees quick heating-up and protects the bottle jack from overheating.
  • Artcraft Durable Frame - Made of anodized 6061 aluminum and 4-piece stainless steel chrome rods - non-rusting and durability.
  • Above 1,000 PSI Delivered - Pairs well with cylinder pre-press mold and 2x4" rosin filter, achieving and maintaining optimal pressure utilizing a vertical filter build, and a pressed puck size of 2.4 sq/in.
  • Replaceable Bottle Jack - Simply remove the bottle jack and replace it with replacement at home to get a long service life.


    • Temperature Range: 0-399F
    • Power: 500 Watts
    • Voltage: 110/220 Volts
    • Total Weight: 31.5 lbs
    • Package Dimension: 21.2" x 14" x 12.4"
    • Frame Dimension: (H) 45cm x (W) 22.5cm x (D) 21.5cm
    • PID Temp Controller Box Dimension: (H) 15cm x (W) 11.5cm x (D) 6.8cm
    • Working Surface: 3" x 5"
    • The tonnage of Original Bottle Jack: 4 Ton
    • Height of Original Bottle Jack7.3"
    • Clearance between Upper and Bottom Platens: 33mm/1.3"

        How to Avoid the Filter Bags from Blowing out?

        • Remove excess stems from flowers.
        • Use less material in your filter bag.
        • Preheating your material first to get it melty before you begin to apply pressure.
        • Apply the pressure more slowly.
        Manual & Troubleshooting Includes:

        • How to choose filters and prepress molds.
        • The yields are not very good, why?
        • How to apply the pressure for optimal yield and quality?
        • How to begin extracting.
        • Important notice.
        • Troubleshooting.
        • Question and answer.
        • Check it out here (Highly recommended to read it before doing a purchase).

        Customer Reviews

        Based on 43 reviews
        Great press

        5/5 - Works well. Probably should have went with the 6-ton but the 4-ton does great pressing the correct amount for the press size.


        Got really decent results on good strains, around 20%. The worst press was 10% return.

        Great product

        Works great no complaints does exactly what it is supposed to do. Happy holidays!

        Truly Potent Results

        This heat press machine comes with everything that u need to get started. Half an hour after I received it n the mail I was consuming the fruits of its labor. Truly an awesome piece of equipment.


        4 Ton Starter Rosin Press - 3x5 Heated Platens - 7-10g Materials Loaded - Upgrade from 3-Ton Press

        User Manual & Troubleshooting Includes:

        - Recommendations on Materials Loaded
        - How to Begin Extracting
        - How to Start
        - Installation
        - Important Notices
        - Questions & Answers
        - Troubleshooting

        User Manual List:

        1, Cylinder Pre Press Mold 
        2, 2X4" Pre Press Mold 
        3, DIY Uncaged Press Plates Kit 
        4, Bottle Jack Styled Rosin Press 
        5, DIY Caged Press Plates Kit 
        6, Hydraulic Cylinder Styled Rosin Press 
        7, Rosin Bags & Combo 
        8, Hydraulic Hand Pump with Gauge 


        Ask a Question
        • Is there lifetime warranty ?

          My apologies to answer so late. We didn't offer a lifetime warranty. However, it seems like a lifetime warranty from other sellers who require " Customer is responsible for shipping to and from the factory". If I were you, I prefer the TURE 1-year warranty.

        • When the order is delivered. Do you have to assemble the press? Or does it already come assembled

          Thanks for reaching out here. 3-Ton press completed setup except the driptech legs need to be installed by rosineer.

        • what is the name of the type of European plug that comes with the European 220v version of the press. I am not sure if a converter is necessary

          Thanks for reaching out. We offer 220v European standard unit and plug, simply plug in and start pressing.

        • Are the presses packaged in plain cardboard like the plate kits?

          The press is indeed packed in cardboard, but it was covered with very strong foam. 

        • The bottle jack no longer holds the pressure. How to fix it?

          You will see a safety valve with the red cap on the bottle jack. Simply remove it off and rotate 90 - 180 degrees clockwise.  We don't recommend to do that If the bottle jack well works. It will cause the fluid leaking If overrated 6-Ton pressure.

        • On the bj-3t33. Can you switch the 3x3 plates for a size bigger like for the 3x4 pucks please get back to me. Thanks Rex. rcmoyer1062@gmail.com

          Thanks for your question. dp-bj3t33 small rosin press is well suited to squeeze 3.5-7g flower or bubble hash. 3x3" sized plates are helpful rosin flows immediately off the heat to preserve the terpenes. If with 3x4" plates, rosin oil will be overheat become the dark. We got a lot of messages from rosineer only concentrate on less 7g material at a time. so we made such AIO press.

        Have Questions? Reach out Here
        You have successfully subscribed!