3-Ton Hydraulic Bottle Jack Heat Press - Dual Heating Dual Thermocouples

In stock

Hydraulic Heat Press


$549.00 $449.00

Dabpress dp-bj3t33 Pro All-in-One Heat Press Machine | 3x3" Anodized Heat Press Plates | 3-Ton Bottle Jack | Drip Tech Integrated | Dual Heating Rods and Sensors | Dual PID Controller Attached


  • 3x3" Anodized Heat Press Plates - Well Suited to Press <7g Materials; Easy to Clean and Best Flavor Guaranteed; 3x3" Small Heated Plates Is Helpful to Flow Away from the Heated Surface to Preserve the Terpenes.
  • Very Accurate Temp Delivered - Utilizing Separate Temp Sensors and Heating Rods.
  • Perfect Alignment Performance - Small Hydraulic Jack Press Made of 6061 Aluminum, 3 Ton Bottle Jack, Stainless Steel Sticks, and Linear Bearings Provide Aligned Movement.
  • Over 1,000 PSI Delivered - Pairs Well with-pm3015r Cylinder Pre-press Mold and dp-bt160ns 2x4" Heat Press Filters, Achieving and Maintaining Optimal Pressure Utilizing a Vertical/Upright Filter Build, and a Pressed Puck Size of 2.4 sq/in.
  • Best Insulation Performance - Dual Insulation Layers Allows the Heat Press Plates to Reach 200 F in 5 Minutes and Protect the Machine from Heat-draining.
  • Driptech Integrated - The Driptech Heat Press Tilts With 35 Degree Angle Utilizing Two Pieces of Aluminum Legs; Preserves the Terpenes in the Oil.  
  • Long Working Lifetime Guaranteed - The Life of the Heating Rod Is up to 6000 times; Durable Solid Frame; Replaceable Bottle Jack.

  • Temperature Range: 0-399F
  • Power: 500 Watts
  • Voltage: 110 Volts
  • Total Weight: 33 lbs
  • Working Surface: 3" x 3"
Packing List:

  • 1 x All-In-One Hydraulic Heat Press 
  • 1 x User Manual
  • 1 x Non-stick Silicon Mat

      The Bottle Jack That Won't Hold Pressure?

      • There is a safety valve covered by a red cap on the bottle jack. Simply remove the red cap and rotate the safety valve 90 - 180 degrees clockwise to adjust the pressure.
      • We don't recommend to do that If the bottle jack already works well. It may cause fluid leaking If it's 3-ton higher than the rated pressure.

      • Do Not Replace Orginal Bottle Jack with over 5 Ton Jack.
      • Highly Recommend to Watch Videos about "How To Use Heat Press Bag and Pre-Press Mold Effectively" from Our Website
      • Recommend dp-pm3015r Cylinder Pre-press Mold to Pair with This Hydraulic Heat Press Kit
      • Recommend dp-bt160ns Heat Press Filters - 160-micron bag

      • One Person Operation
      • Keep It out of Reach of Children
      PID Controller Setting:

      • Press "SET" button to activate temperature controller
      • Press ◄ button to increase and decrease the value at hundreds, tens and one's places
      • Press ▼ or ▲ from 0-9 for your desired temp
      • Press "SET" button to lock the desired temperature in place
      Quick Start Guide:

      How to Save Your Money?

      1, Please buy our bundled products - Learn more
      2, Please read our news about promotional products - Learn more
      3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.

      Be Noted, Please!

      • Bundle order discount and our promotion code cannot be used at the same time.
      • To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.

      Our Policies

      Customer Reviews

      No reviews yet


      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Recently Viewed Products

      Customer Reviews

      No reviews yet