Dabpress dp-bj4t35 Pro All-in-One Heat Press Machine | 3x5" Anodized Heat Press Plates | 4-Ton Bottle Jack | Drip Tech Integrated | Dual Heating Rods and Sensors | Dual PID Controller Attached
- 3x5" Anodized Heat Press Plates - Well Suited to Press 7-10g Materials; Easy to Clean and Best Flavor Guaranteed; 3x5" Small Heated Plates Is Helpful to Flow Away from the Heated Surface to Preserve the Terpenes.
Very Accurate Temp Delivered - Utilizing Separate Temp Sensors and Heating Rods.
- Perfect Alignment Performance - Small Hydraulic Jack Press Made of 6061 Aluminum, 4 Ton Bottle Jack, Stainless Steel Sticks, and Linear Bearings Provide Aligned Movement.
Over 1,000 PSI Delivered - Pairs Well with-pm3015r Cylinder Pre-press Mold and dp-bt160ns 2x4" Heat Press Filters, Achieving and Maintaining Optimal Pressure Utilizing a Vertical/Upright Filter Build, and a Pressed Puck Size of 2.4 sq/in.
- Best Insulation Performance - Dual Insulation Layers Allows the Heat Press Plates to Reach 200 F in 5 Minutes and Protect the Machine from Heat-draining.
Driptech Integrated - The Driptech Heat Press Tilts With 35 Degree Angle Utilizing Two Pieces of Aluminum Legs; Preserves the Terpenes in the Oil.
Long Working Lifetime Guaranteed - The Life of the Heating Rod Is up to 6000 times; Durable Solid Frame; Replaceable Bottle Jack.
The Bottle Jack Won't Hold Pressure?
- You May Need To Bleed The Bottle Jack First.
- There is a safety valve covered by a red cap on the bottle jack. Simply remove the red cap and rotate the safety valve 90 - 180 degrees clockwise to adjust the pressure. We don't recommend to do that If the bottle jack already works well. It may cause fluid leaking if rotated further than recommended.
- Bottle Tech Pre Press Mold | dp-pm3015r | 3.5-7g Flower Only
- Hammer Pollen Press | dp-pm30s | 3.5-10g Hash, Kief, and Flower
- PrePress Collection
- Temperature Range: 0-399F
- Power: 500 Watts
- Voltage: 110/220 Volts
- Total Weight: 31.5 lbs
- Package Dimension: 21.2" x 14" x 12.4"
- Frame Dimension: (H) 45cm x (W) 22.5cm x (D) 21.5cm
- PID Temp Controller Box Dimension: (H) 15cm x (W) 11.5cm x (D) 6.8cm
- Working Surface: 3" x 3"
- The tonnage of Original Bottle Jack: 4 Ton
- Height of Original Bottle Jack: 7.3"
- Dabpress Rosin Heat Press - Size Comparison
- 1 x 3-Ton Heat Press Frame
- 1 x PID Temp Controller Box
- 1 x Instruction Manual
- 1 x Non-stick Silicone Mat
- 110V Version Is In Fahrenheit, 220V Version Is In Celsius
- Do Not Replace Orginal Bottle Jack with over 5 Ton Bottle Jack.
- Integrated Bottle Jack is Not Compatible With Gauge Kit
PID TEMP CONTROLLER SETTING:
Press "SET" button to activate temperature controller
Press ◄ button to increase and decrease the value at hundreds, tens and one's places
Press ▼ or ▲ from 0-9 for your desired temp
Press "SET" button to lock the desired temperature in place
- One Year Warranty for the Springs, Plate, Frame and Cage.
- One Year Warranty for the PID Temp Controller Box.
- Only Pay 50% to Get A New Temp Controller Box Once out of Warranty.
How to Save Your Money?
1, Please buy our bundled products - Learn more
2, Please read our news about promotional products - Learn more
3, If the total order is less than $60, buy it off our Amazon Online Store - Check the link on the detail page.
Be Noted, Please!
- Bundle order discount and our promotion code cannot be used at the same time.
- To recommend Amazon prime member ( Located in the USA ) for saving on shipping charges to buy off our Amazon online store.