• My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?

    My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why?
    My Rosin Press Hydraulic Hand Pump Will Not Maintain Pressure Well, Why? To help prevent personal injury, always release pump pressure and disconnect hoses(s) from pump before making repairs.Refer to the appropriate pump parts list during trouble-shooting. Please check these problems yourself first, and then make clear what happened to your pump: Problem Cause Solution  Pump losing pressure System components leaking Directional control valve leaks ornot...
  • Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun

    Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun
    Rosin Press Delivered the Inaccurate Temperature After Measuring with My Infrared (IR) Thermometer Gun, Why? To be honest, when we measure the temperature of the heating plate during the process of manufacturing, the temperature obtained by the infrared thermometer is different every time. Actually, many factors will affect the test results: 1. Measure different positions of the heating plate. 2. Measure under different ambient temperature....
  • Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash?

    Why Can't We Use Rosin Press to Produce the Puck of  Flower or Hash?
    Why Can't We Use Rosin Press to Produce the Puck of Flower or Hash? We at Ddabpress Team often receive complaints from Rosineers about why 2x4" rosin pre press mold can not load between the heated plates of the rosin press for making puck. Honestly, we can only patiently explain to customers that this kind of operation will scratch the contact surface and even damage the...
  • My Bottle Jack Rosin Press Does Not Hold Pressure, Why?

    My Bottle Jack Rosin Press Does Not Hold Pressure, Why?
    My Bottle Jack Rosin Press Does Not Hold Pressure, Why?There are many factors that may cause the jack to not hold pressure, much apprecaited if you could check it out by yourself:  Symptom Possible Causes Corrective Action Jack will not lift load Release valve not tightly closed Overload condition Air pressure inadequate Ensure release valve tightly closed Remedy overload condition Ensure adequate air pressure...
You have successfully subscribed!